Thank you for downloading!
Open this file to setup the Connector.
Open the downloaded ConnectorSetup.exe file to setup the Connector.
We recommend to install the Connector on a Windows Server that’s permanently running.
We recommend to install the Connector on a Windows Server that’s permanently running.
STEP 1
Open
Open the ConnectorSetup.exe file from the downloads list from your browser.
![](https://smarfac.com/wp-content/uploads/2022/09/Bottom-rectangle-EN-smartimg_white.png)
![](https://smarfac.com/wp-content/uploads/2022/09/Bottom-rectangle-EN-smartimg_black.png)
STEP 2
Allow
If prompted, click “Yes” on the system dialogs.
![](https://smarfac.com/wp-content/uploads/2022/04/Step-2-modal-smartimg_white_1.png)
![](https://smarfac.com/wp-content/uploads/2022/04/Step-2-modal-smartimg_black.png)
STEP 3
Install
Wait for the installation to finish. The Connector will open automatically when it’s done.
![](https://smarfac.com/wp-content/uploads/2022/04/Step-3-modal-smartimg_white_1.png)
![](https://smarfac.com/wp-content/uploads/2022/04/Step-3-modal-smartimg_black.png)